Tk Series Synchronous Motor for Drive Compressors and Pumps Tk800-16 1730 800kw 10kv IP20

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk800-16 1730 800kw 10kv IP20

I. Overview
The massive 3-period synchronous motor for TK sequence air compressor is a high-overall performance collection product specifically made and designed by our business for the load of air compressor.
This series of motors adopts new technologies, new materials, new processes, exquisite substance variety, and refined manufacturing. It has the qualities of tiny dimensions, light bodyweight, lovely look, large performance, minimal sounds, minimal vibration, secure and trustworthy procedure, and practical use and upkeep.
2. Implementation requirements
GB755 Rotating Motor Rating and Efficiency
Classification of GB/T997 rotary motor construction variety, installation kind and junction box placement (IM code)
GB/T1571 A few-phase synchronous motor examination approach
GB/T1993 Rotating Machine Cooling Approach
GB/T4942.one Defense course (IP) classification of the total framework of rotating electrical machines
GB/T10068 The measurement, analysis and limit of mechanical vibration with a shaft center peak of 56mm and over
GB/T10069 Rotating Machine Noise Measurement Strategy and Limit
JB/T8667.one CZPT Problems of Big Three-section Synchronous Motor Element one: TK Sequence
3. Fundamental complex parameters
Electrical power variety: 250~10000KW
Rated voltage: 6000, 10000V
Rated pace: 250, 273, 300, 333, 375, 428, 500, 600r/min
Rated frequency: 50HZ
Defense stage: IP00, IP20, IP23, IP44
Insulation class: F
Quota: SI
Cooling technique: IC01, IC37, IC81W
Set up approach: IM7311, IM5710, IM7312, IM7315
*Can be produced according to other parameters according to consumer demands
4, complex characteristics
four.1 The structural style is reasonable, secure and trustworthy, and the ability to step out of stage is robust.
4.two The major insulation composition utilizing new insulating supplies has large voltage resistance and lengthy motor life.
4.3 The temperature increase margin is huge. The motor adopts F-course insulation, and the temperature rise is assessed according to the temperature rise restrict of the B pole insulation.
four.four The defense device is superior and complete.
four.1.one The stator windings and bearings are geared up with temperature detection gadgets, which can detect, alarm and journey.
four.four.two Shutdown place heater with anti-condensation impact.
four.5 Massive inertia. Motors with various moments of inertia can be created according to user requirements.
Five, framework kind
5.one The general construction of this collection of motors is welded with metal plates for the body, end cover, and base plate. The motor is an impartial cavity, and the slip ring can be created with distinct protection stages according to user specifications.
five.two Stator: The stator frame is welded by metal plate. The motor stator outlet is led out by a large-voltage rubber cable. The outlet placement can be led out from the lower part of the foundation or from the major junction box on the aspect of the motor.
The stator main is superimposed by low-decline silicon metal sheets, and the core sections are separated by radial air flow ducts.
The stator winding is F grade insulation, and the temperature increase is assessed according to B grade to aid extend the provider daily life. It adopts VPI overall dipping paint treatment method, which has high electrical performance, mechanical strength, insulation performance, moisture resistance and thermal stability.
5.3 The rotor magnetic pole core is produced of laminated metal plates, and has diverse buildings this sort of as magnetic pole screws and T tails. The rotor bracket has air flow holes and is equipped with a fan, which can properly manage the temperature rise of the rotor.
5.four Adopt seat kind spherical sliding bearing. The bearings are insulated to prevent shaft currents.
Use new lubricating oil and thin-walled bearing alloy tiles, and established electromagnetic centerline signs.
five.5 In accordance to user requirements, the slip ring can be made as a constructive strain ventilation construction to increase the security of the motor. The whole size of the motor with the good stress ventilation structure of the slip ring is somewhat enhanced.
6. Conditions of Use
6.1 Voltage fluctuation: ±5% (It can run below ±10% beneath the problems of seven.three in GB755)
six.two Frequency fluctuation: ±2%
six.three The altitude does not exceed 1000m
six.four The maximum ambient temperature does not exceed +40ºC, and the least is 0ºC.
Seven, design description
 TK1250-sixteen/2150

Outer diameter of stator punch (Φ2150mm)

Variety of poles (sixteen poles)

Rated electrical power (1250KW)
Three-stage synchronous motor for compressor
eight. Buying instructions
8.1 Before inserting an purchase, make sure you refer to the solution catalog of this collection to clarify the required merchandise product, requirements and other info. If there is a discrepancy among the requirements and the samples, make sure you contact our business.
eight.2 The motor product, rated electrical power, synchronous velocity, rated voltage, rated frequency, safety stage, second of inertia, rotation path, installation type, etc. need to be indicated when ordering.
8.3 The sample technological info sheet only lists the related information of motors with rated voltages of 6KV and 10KV. If users need other voltage ranges, our organization can also offer appropriate technical info when purchasing.
8.4 The specialized information and proportions in the sample are only for reference when the consumer selects the model. The formal details will be presented by the firm soon after the agreement or complex arrangement is signed.
eight.5 If there are any other special specifications, remember to provide the needs and indicator the relevant technical agreement when buying.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk800-16 1730 800kw 10kv IP20