2. The electric powered counterbalance TKA sequence consists of a selection of forklifts with lifting capacity from 1000 to 1500 kilograms and elevate heights up to four.five meters (double mast)
3. Incline secure lock, Oil duct protection journey valve
| pecification | one | ManufacturerGP | GP | ||||
| 2 | Design | CPD20 | CPD25 | CPD30 | CPD35 | ||
| 3 | Power Kind | CZPT | |||||
| four | Rated Load Capability | kg | 2000 | 2500 | 3000 | 3500 | |
| five | Load Centre | mm | five hundred | ||||
| Proportions | 6 | Rated Carry Top | mm | 3000 | |||
| seven | Free Raise Top | mm | 140 | a hundred forty five | |||
| 8 | Tilting Angle (F/R, α°/β°) | Deg | 6°/12° | ||||
| 9 | Peak when Mast Reduced | mm | 2045 | 2060 | |||
| 10 | Top to Safeguard | mm | 2150 | 2150 | |||
| 11 | Min. Ground Clearance | mm | 120 | a hundred thirty | |||
| twelve | Length (to Fork Experience) | mm | 2388 | 2518 | 2578 | ||
| 13 | Width | mm | 1150 | 1225 | |||
| 14 | Fork Dimensions (L×W×T) | mm | 1070×125×40 | 1070×125×45 | |||
| fifteen | Fork Unfold (Min./Max.) | mm | 250/1040 | 250/1100 | |||
| 16 | Overhang Front | mm | 478 | 483 | |||
| seventeen | Overhang Rear | mm | 410 | 435 | 495 | ||
| eighteen | Min. Turning Radius | mm | 2080 | 2260 | 2320 | ||
| 19 | Peak when Mast CZPTd | mm | 4145 | 4160 | |||
| twenty | Doing work Aisle Width with Pallet (Ast)*, 1000×1200 Crossways | mm | 3925 | 4080 | 4140 | ||
| 21 | Functioning Aisle Width with Pallet (Ast)*, 800×1200 Lengthways | mm | 4571 | 4180 | 4240 | ||
| Performance | 22 | Travel Speed (Total Load) | km/h | twelve | twelve | ||
| 23 | Journey Velocity (No Load) | km/h | thirteen | 13 | |||
| 24 | Lifting Speed (Entire Load) | mm/s | 290 | 280 | |||
| twenty five | Lifting Pace (No Load) | mm/s | four hundred | four hundred | |||
| 26 | Gradeability (Full Load) | % | fifteen | 15 | 12 | ||
| 27 | Gradeability (No Load) | % | fifteen | 15 | thirteen | ||
| 28 | Support Brake (Operation/Manage) | Foot/Powershift | |||||
| 29 | Parking Brake (Procedure/Control) | Hand/Mechanical | |||||
| Generate | 30 | Tyre (FrontX2) | 7.00-twelve-12PR | 28×9-15-12PR | |||
| 31 | Tyre (RearX2) | 18×7-8-14PR | 18×7-eight-14PR | ||||
| 32 | Tread (Entrance) | mm | 970 | one thousand | |||
| 33 | Tread (Rear) | mm | 950 | 970 | |||
| 34 | Wheelbase | mm | 1500 | 1600 | |||
| Bodyweight | 35 | Overall Fat (Consist of Battery Box) | kg | 4060 | 4260 | 5150 | 5570 |
| 36 | Entrance Axle Excess weight Distribution(Complete Load) | kg | 5180 | 5823 | 7210 | 8070 | |
| 37 | Rear Axle Weight Distribution (Full Load) | kg | 880 | 937 | 940 | one thousand | |
| 38 | Front Axle Fat Distribution (No Load) | kg | 1675 | 1665 | 2318 | 2520 | |
| 39 | Rear Axle Bodyweight Distribution (No Load) | kg | 2385 | 2595 | 2832 | 3050 | |
| Drive | 40 | Drive Motor | kw | eleven | twelve | ||
| 41 | Pump Motor | kw | eleven | 12 | |||
| forty two | CZPT Battery | V/Ah | forty eight/560 | eighty/five hundred | |||
| 43 | Controller Type | AC | |||||
| 44 | Controller Maker | ZAPI | |||||
| forty five | Functioning Pressure for Attachment | Mpa | seventeen.five | ||||
– Duplex/duplex entire cost-free/triplex mast
– Facet shifter/fork positioner/rotator/paper roll clamps
– Removable broad see cabin/air conditioner/heater
– Sound tyre/no-marking sound tyre/super elastic tyre
For more info, you should kindly speak to us.
Main characteristics:
AC Gear Motor for Retort Sterilizers 121 degrees Celsius, saturated steam, 90 minutes per cycle,…
AC Gear Motor for Vacuum Packaging Machines Running a vacuum pump at 2 900 rpm…
AC Gear Motor for Frozen Spiral Conveyors Minus 35 degrees, 100 percent humidity, ice buildup…
AC Gear Motor for Industrial Food Mixers From thin syrups to stiff bread dough —…
AC Gear Motor for Food-Grade Conveyor Belts Designed for daily CIP washdown, continuous product flow,…
AC Gear Motor for Palletizing Robots Hundreds of reversals per hour, high-inertia arm loads, and…