6kv Yrkk Large Size Asynchronous AC Electric Three Phase Induction Motor

The power amount, installation proportions and electrical functionality of the 6KV higher-voltage slip ring a few-phase asynchronous motor are in compliance with pertinent IEC specifications. The basic installation approach of the motor is the horizontal base angle (IMB3), the doing work system is the steady functioning method (S1), and the wound rotor is created of Class F insulation substance.
The bearing of 6KV large-voltage wound rotor slip ring motor has two sorts of rolling bearing and sliding bearing, based on the motor electrical power and velocity. If the motor has a substantial diploma of protection, the protection level of the bearing will also increase. The rated frequency of the motor’s power supply is 50Hz, the rated voltage is 6000V, and the standard type of protection is IP54. The motor slip ring housing can be protected to IP22 or IP23. Other voltage, frequency and degree of protection motors are also CZPT upon request.
6KV higher voltage winding rotor slip ring motor principal outlet box is IP54 protection quality, normally mounted on the correct aspect of the motor (experiencing the motor shaft extension end), can also be put in on the still left side of the motor according to the order specifications. Inside the primary outlet box, outside the house There are individual floor terminals.
6KV large-voltage winding slip ring motor raises the setting and bearing temperature measuring unit. It can also include heating system inside the motor. The shaft extension essential of the motor normally adopts the tangential key, and the motor carbon brush is not lifting construction.
6KV substantial-voltage wound rotor slip ring motor can be utilized to drive a variety of diverse equipment, these kinds of as compressors, pumps, crushers, cutting device instruments, transportation equipment and other mechanical equipment, in mining, equipment market, petrochemical industry, power crops, and so on. Used as key mover in a variety of industrial and mining enterprises. The motor utilised to travel the blower, coal mill, rolling mill and winch need to show the objective and complex requirements when ordering, and undertake special style to ensure trustworthy operation.

Heart height selection: H355 ~ 1000mm
Electrical power assortment: 220kW ~ 10000kW
Quantity of poles: two/4/six/8/ten/12
Rated voltage: 6000V/6600V
Rated frequency: 50HZ/60HZ
Defense level: IP54 or IP55
Insulation class: F
Perform method: S1 (constant)
Cooling approach: IC611/IC616
Installation form: IMB3
Motor link: Y (3 outlet terminals in the junction box, the junction box from the extension of the spindle is situated on the right aspect of the foundation)
Altitude: no a lot more than 1000m
This type of motor is suitable for use in environments exactly where the ambient air temperature does not exceed 40 ° C and there is no critical dust, the minimal ambient air temperature is -fifteen ° C, and there is no corrosive and explosive gas in the air (which can also be created into a moist heat or higher-altitude motor).

The 6KV substantial-voltage wound rotor slip ring motor can enhance the massive commencing torque at a modest commencing current. The motor is appropriate for purposes in which the capability of the feeder line is inadequate to start off the squirrel-cage rotor, the starting time is lengthy, the starting is repeated, and the little-selection velocity regulation is needed. This collection of motors has the positive aspects of large performance, energy preserving, minimal noise, low vibration, gentle bodyweight, trustworthy performance, convenient set up and maintenance.

Main approach flow of the motor
Motor stator: casing processing → punching press → iron core seating → coil creating → weaving → dipping paint drying
Electronic rotor: blank shaft processing → iron core press set up → iron main forged aluminum → rotor string shaft → weave → dipping paint drying → dynamic equilibrium
Motor assembly: stator rotor assembly → equipment test → motor visual appeal coloring → packaging storage

The company insists on offering large-good quality motor products and providers to users, and has won high praise from many domestic and overseas consumers. The firm will acquire numerous foreign merchants to pay a visit to our factory every year, and create a excellent cooperative connection through on-site inspection of our manufacturing unit. Our organization usually welcomes clients to pay a visit to our factory.

Our firm’s motor producing manufacturing facility adheres to the concept of eco-friendly, effective and power-saving generation services, pays interest to the harmonious advancement of inner and exterior environment, builds environmentally welcoming motor production enterprises, strictly implements motor standard approach, and selects higher-high quality power-conserving supplies to ensure the good quality of motor goods.

If you are interested in our merchandise motor,pls come to feel totally free to get in touch with us!  Thank you really much!
HangCZPT ZCL CZPT Motor Technology Co., Ltd
Address: CZPT Zone, Zhangjiazhuang Town, Airport Road, gaocheng District, HangCZPT, ZheJiang , China
ZheJiang PROVINCE, CHINA
Welcome to pay a visit to our manufacturing facility!!!