Categories: Product Catalog

Electrical Brushless DC Motor 36 Volt Synchronous Motor 15kw

Silent, steady and reputable for long life operation
1.Diameters: 62mm
two.Lengths:  64mm84mm104mm
3.Steady torques: .22Nm0.40Nm0.65Nm
4.Energy: 74W126W204W
5.Speeds up to 3200rpm3000rpm3000rpm
6.Environmental problems: -10~+40°C
seven.Number of poles/period:4/three
eight.Mangnet material:Sintered NdFeB
9.Insulation course:B
10.Optional: electronic motorists, encoders and gearheads, as properly as Corridor result resolver and sensorless opinions
eleven.We can design the specific voltage and shaft, and so on

Product 62ZWX01 62ZWX02 62ZWX03
Voltage V 36
No load velocity rpm 3900 3700 3700
Rated torque Nm .22 .40 .sixty five
Rated velocity rpm 3200 3000 3000
Rated existing A 4.5 seven.10 twelve.7
Torque(max) Nm .66 one.one one.80
At Torque(max)Recent A eleven.five seventeen.8 32.0
Rotor inertia Kgmm² 19.0 37.five 55.eight
Back again-EMF consistent V/krpm four.30 four.60 four.53
Torque Continual Nm/A .062 .065 .061
Resistance(20ºC) ohm .fifty seven .24 .13
Bodyweight Kg .90 one.three one.8
L1 mm 64 eighty four 104
Rotor:La mm twenty 40 sixty

Normal variety of shaft

 

ep

Share
Published by
ep

Recent Posts

AC Gear Motor for Retort Sterilizers

AC Gear Motor for Retort Sterilizers 121 degrees Celsius, saturated steam, 90 minutes per cycle,…

3 mois ago

AC Gear Motor for Vacuum Packaging Machines

AC Gear Motor for Vacuum Packaging Machines Running a vacuum pump at 2 900 rpm…

3 mois ago

AC Gear Motor for Frozen Spiral Conveyors

AC Gear Motor for Frozen Spiral Conveyors Minus 35 degrees, 100 percent humidity, ice buildup…

3 mois ago

AC Gear Motor for Industrial Food Mixers

AC Gear Motor for Industrial Food Mixers From thin syrups to stiff bread dough —…

3 mois ago

AC Gear Motor for Food-Grade Conveyor Belts

AC Gear Motor for Food-Grade Conveyor Belts Designed for daily CIP washdown, continuous product flow,…

3 mois ago

AC Gear Motor for Palletizing Robots

AC Gear Motor for Palletizing Robots Hundreds of reversals per hour, high-inertia arm loads, and…

3 mois ago