Product characteristic
Rated voltage :120VAC-220VAC-50/60Hz , 1800-2900rpm .
Typical used: Exhaust admirer, air purifier, micro-oven, admirer, induction cooker, refrigerator, pump, heater, hood oven, blower, air conditioner, Heater devices, dehumidifiers .
Thermal protector with a single shot fuse or multi shot fuse
CZPTal specification
| Model | A OF Dimension | VOLTAGE | STATOR DIA | SPEED SECTRION | Input POWER | Existing | SPEED RPM | ROTATION |
| YY8015D | 15mm | 120VAC-220VAC 50HZ/60HZ | 80MM | H | 65W | .32A | 2900RPM | CW/CCW |
| M | 54W | .28A | 2000RPM | CW/CCW | ||||
| L | 35W | .15A | 1500RPM | CW/CCW | ||||
| YY8571D | 25mm | 120VAC-220VAC 50HZ/60HZ | 80MM | H | 180W | .62A | 2878RPM | CW/CCW |
| M | 130W | .36A | 2600RPM | CW/CCW | ||||
| L | 80W | .32A | 2400RPM | CW/CCW | ||||
| YY8035D | 35mm | 120VAC-220VAC 50HZ/60HZ | 80MM | H | 220W | .68A | 2900RPM | CW/CCW |
| M | 160W | .50A | 2600RPM | CW/CCW | ||||
| L | 120W | .42A | 2400RPM | CW/CCW | ||||
| YY8040D | 40mm | 120VAC-220VAC 50HZ/60HZ | 80MM | H | 270W | .70A | 2900RPM | CW/CCW |
| M | 220W | .58A | 2200RPM | CW/CCW | ||||
| L | 180W | .45A | 1800RPM | CW/CCW |
Observed :
Shaft diameter (d) can be : φ5,φ5.five,φ6,φ6.35mm or as needed.
Stator stack thickness (A) can be any sort 15mm to 50mm.
Motor enter electricity can be from 30W to 50W ( approx )
Thermostat or fuse are the two CZPT for in excess of heating safety.
Mechanical dimensions
Curve chart
Sounds and air flow testing
| YY8040D-505G 4UF | |||||||
| Pace | Air flow (m³/H) | Sounds (db) Environmental sound 22db | |||||
| Channel one | Channel two | Channel 3 | Channel four | Channel 5 | Channel 6 | ||
| H | 760.39 | 64.7 | sixty three.six | seventy one.3 | 63.7 | sixty eight.four | sixty seven.2 |
| M1 | 553.68 | 57.nine | fifty six.eight | sixty four.five | fifty six.5 | sixty one.5 | sixty.five |
| M2 | 369.eighty one | forty seven.9 | forty seven.5 | fifty three.eight | 46.3 | fifty.8 | 50.six |
| L | 247.29 | 38.7 | 38.eight | forty four | 37.four | 40.9 | forty one.3 |
ABOUT US
Ritscher group was set up in 2006.we usually emphasis on micro-motors for household electrical appliance and business equipment considering that location up.presently we have two expert micro-motor factories in China which severally located in HangCZPT town and HangCZPT city.it has an location of twenty five,000 square meters plants and far more than three hundred employees, once-a-year output is 3 million pcs and has 5 million pcs annual producing capacity.soon after numerous a long time growth,we experienced built a great status in the marketplace and obtained more and a lot more customers’ trust in the world.
We began from shaded pole motors at commencing, up to now,our product included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our merchandise are widely utilized for creating refrigerators, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, therapeutic massage devices and many other equipments.
As a realiable top quality guaranty,Ritscher has total R&D departement,QC section,making office,obtain section and so on. has best creating equipment like Aluminum diecasting, Zinc diecasting, Sheet metal stamping, CZPT injection molding and so on. also check/ detection gadget like multiplex temp measuring unit, functionality parameter inspection unit, Phenol peptide solution pinhole tester,Anechoic area etc.
Endeavoring to provide the best merchandise and support to clients,we always do the most work to turn into an exceptional manufacturer of micro motors.
Ritscher is always prepared to create honest business partnership with pals from all more than the world.
Welcome make contact with with us!
Just take ritscher ,enjoy contemporary daily life!
Our firm FAQ for you
(1) Q: What variety motors you can offer?
A:For now,we mainly give Kitchen Hood Motor,DC Motor,Equipment Motor,Admirer Motor Fridge Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and so on.
(two) Q: Is it achievable to pay a visit to your factory
A: Positive. But remember to kindly maintain us posted a number of times in progress. We need to have to verify our
schedule to see if we are CZPT then.
(three) Q: Can I get some samples
A: It is dependent. If only a few samples for personal use or replacement, I am afraid it will
be hard for us to provide, since all of our motors are custom manufactured and no stock
CZPT if there is no further requirements. If just sample screening just before the official purchase and
our MOQ, price tag and other terms are satisfactory, we’d really like to provide samples.
(four) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is between 1000~ten,000pcs for different models following sample acceptance.
But it really is also ok for us to settle for smaller sized plenty like a few dozens, hundreds or hundreds
For the first three orders soon after sample acceptance.For samples, there is no MOQ necessity. But the significantly less the much better (like no a lot more than 5pcs) on issue that the amount is ample in situation any adjustments needed following original testing.
AC Gear Motor for Retort Sterilizers 121 degrees Celsius, saturated steam, 90 minutes per cycle,…
AC Gear Motor for Vacuum Packaging Machines Running a vacuum pump at 2 900 rpm…
AC Gear Motor for Frozen Spiral Conveyors Minus 35 degrees, 100 percent humidity, ice buildup…
AC Gear Motor for Industrial Food Mixers From thin syrups to stiff bread dough —…
AC Gear Motor for Food-Grade Conveyor Belts Designed for daily CIP washdown, continuous product flow,…
AC Gear Motor for Palletizing Robots Hundreds of reversals per hour, high-inertia arm loads, and…