Higher – Pace and Energy – Successful Crecent Former Tissue Equipment
Application:
Mostly for the creation of manufacture paper with pulp 13 – thirty g / m2, rest room paper. Paper serviette foundation paper
CZPTs Parameters:
1. Pulp: wooden pulp plate, waste paper etc as raw content
- Feeding pulp focus : .three-.9‰
- Beating degrees : 30-38°SR
- Paper sheet dryness
occur out from wire circumstance : eighteen-twenty%
Before go via MG cylinder : 36-forty%
Occur out from MG cylinder : 90-94%
Complete tissue : ninety-ninety four%
- Lateral shrinkage : 8-10%
- Day managing several hours: 22 hrs/d
- Papermaking fee : ninety four%
- Generate : ninety five%
- Contact roll line pressure: sixty KN/m
Supporting parameter
one. AC voltage : 380V50Hz
- Management voltage : 220/24V
- H2o stress: .3Mpa
Doing work force: .2Mpa
- Compressed air strain: .8Mpa
Operating stress: .5Mpa
- Steam stress: .6Mpa
Functioning pressure:.3Mpa
- Vacuum suction tank: 20-40Kpa
- Water prerequisite: pure coloration, get rid of impurities, PH benefit 6.eight
Principal CZPT Parameters:
one. Paper fat: 18-30g/m2
- Internet width of paper :1575mm
- Made speed : 250m/min
- Doing work pace: 160-230m/min
- Nominal capability : four-6T/D
- Monitor gauge : 2400mm
- Wrinkling fee : fifteen-30℅
- Push way: Y-type AC motor generate division, part push
- Manage way:frequency conversion
- Energy:
MG cylinder motor: 95kw
Roll-cylinder motor: 7.5kw
Whole:102.5Kw
- Arrangement: solitary-layer, the still left and proper hand arrangement
Merchandise / PM kind | 1575 | 1880 | 2400 | 2900 | 3500 | 3900 |
Style Speed (m/min) | 250 | 250 | 250 | 250 | 250 | 250 |
Functioning Velocity (m/min) | one hundred sixty-230 | one hundred sixty-230 | one hundred sixty-230 | one hundred sixty-230 | 160-230 | 160-230 |
GSM Selection (g/m2) | 13-thirty | thirteen-thirty | thirteen-thirty | thirteen-30 | thirteen-30 | thirteen-thirty |
Capability | 4-6 | five-8 | 7-ten | 8-twelve | ten-15 | eleven-eighteen |
Diameter of Dryer (mm) | Φ2500-3000 | Φ2500-3000 | Φ2500-3000 | Φ2500-3000 | Φ2500-3000 | Φ2500-3000 |
Motor (kw) | 37-forty five | 45-fifty five | fifty five-75 | 75-ninety | ninety-a hundred and ten | 90-a hundred and ten |
Gauge(mm) | 2400 | 2800 | 3400 | 3900 | 4500 | 4800 |
Images: