Product Description
| AC Gear Motor | |||||||
| 4 | RK | 25 | R | C | C | F | G10 |
| Outer Diameter | Motor Type | Power Capacity | Speed Motor | Votalge | Output Shaft Shape | Accessories | Derived Code |
| 2 – 60mm 3 – 70mm 4 – 80mm 5 – 90mm 6 – 100mm |
IK – Induction RK – Reversible TK – Torque |
6 – 6W 15 – 15W 40 – 40W 60 – 60W 90 – 90W 120 – 120W 140 – 140W 180 – 180W 200 – 200W 250 – 250W |
R | A -1 Phase 110V C – 1 Phase 220V C2 – 1 Phase 110V/220V S – 3 Phase 220V S2 – 3 Phase 220V/380V S3 – 3 Phase 380V S4 – 3 Phase 440V SS3 – 3 Phase 220V/380V |
A – Round Shaft C – Toothed Shaft |
T/P – Thermally Protected F – Fan M – Electro-manetic Z – Damping |
Dimension Shaft Length |
| AC Gearhead | |||||
| 4 | GN | 60 | K | G12 | T |
| Outer Diameter | Motor Shaft Shape | Gear Ratio | Bearing Model | Output Shaft Diameter | Installation Method |
| 2 – 60mm 3 – 70mm 4 – 80mm 5 – 90mm 6 – 104mm |
GN – Bevel Gear Shaft GU – Bevel Gear Shaft GS – Strengthen T-shaped installation GZ – Right-angle gearbox GM – Intermediate gearbox |
60 – 1:60 | K – Standard Rolling Bearings RT – Right Angle RC – Right Angle Hollow |
G12 – Ф12mm | L – Screw Hole T – Through Hole |
| Specifications of Motor | |||||||||||||||||||
| Motor Type | Motor Model No. | Description | Rating | Start Condenser | Gear Model No. | ||||||||||||||
| Cylindncal Output Shaft |
Pinion Cut Output Shaft |
Force | Peripheral Wave No. | Valtage | Current | Start Turning Moment | Turning Moment | Revolving No. | Capacity | Resistance Voltage | Pairing Bearing | Middle Gear | |||||||
| ( W ) | ( Hz ) | ( V ) | ( A ) | ( gcm ) | ( gcm ) | ( rpm ) | ( uF ) | ( V ) | |||||||||||
| Rerersible Motor |
4RK25A-A | 4RK25GN-A | 25 | 50 | 110 | 0.60 | 1950 | 1950 | 1250 | 8 | 250 | 4GN-K | 4GN10X | ||||||
| 60 | 110 | 0.55 | 1650 | 1620 | 1500 | 7 | |||||||||||||
| 4RK25A-C | 4RK25GN-C | 50 | 220 | 0.30 | 1950 | 1950 | 1250 | 2 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.27 | 1650 | 1620 | 1500 | 1.8 | |||||||||||||
| 4RK30A-A | 4RK30GN-A | 30 | 50 | 110 | 0.70 | 2400 | 2350 | 1250 | 10 | 250 | 4GN-K | 4GN10X | |||||||
| 60 | 110 | 0.65 | 1950 | 1950 | 1500 | 8 | |||||||||||||
| 4RK30A-C | 4RK30GN-C | 50 | 220 | 0.35 | 2400 | 2350 | 1250 | 2.5 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.32 | 1950 | 1950 | 1500 | 2 | |||||||||||||
| 4RK40A-A | 4RK40GN-A | 40 | 50 | 110 | 0.80 | 3250 | 3250 | 1250 | 16 | 250 | 4GN-K | 4GN10X | |||||||
| 60 | 110 | 0.75 | 3600 | 2600 | 1500 | 14 | |||||||||||||
| 4RK40A-C | 4RK40GN-C | 50 | 220 | 0.40 | 3250 | 3250 | 1250 | 4 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.38 | 2600 | 2600 | 1500 | 3.5 | |||||||||||||
| Induction Motor |
4IK25A-A | 4IK25GN-A | 25 | 50 | 110 | 0.55 | 1650 | 1950 | 1250 | 7 | 250 | 4GN-K | 4GN10X | ||||||
| 60 | 110 | 0.50 | 1380 | 1620 | 1500 | 6 | |||||||||||||
| 4IK25A-C | 4IK25GN-C | 50 | 220 | 0.28 | 1650 | 1950 | 1250 | 1.8 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.25 | 1350 | 1620 | 1500 | 1.5 | |||||||||||||
| 4IK30A-A | 4IK30GN-A | 30 | 50 | 110 | 0.65 | 2050 | 2350 | 1250 | 10 | 250 | 4GN-K | 4GN10X | |||||||
| 60 | 110 | 0.60 | 1750 | 1950 | 1500 | 8 | |||||||||||||
| 4IK30A-C | 4IK30GN-C | 50 | 220 | 0.33 | 2050 | 2350 | 1250 | 2.2 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.30 | 1750 | 1950 | 1500 | 2 | |||||||||||||
| External Dimension | |||||||||||||||||||
| Type | Reduction Ratio | L1(mm) | L2(mm) | L3(mm) | |||||||||||||||
| 4IK(RK)25A(GN) | 1:3 ~ 1:20 | 86 | 32 | 118 | |||||||||||||||
| 4IK(RK)30A(GN) | 86 | 32 | 118 | ||||||||||||||||
| 4IK(RK)40A(GN) | 101 | 32 | 133 | ||||||||||||||||
| 4IK(RK)25A(GN) | 1:25 ~ 1:180 | 86 | 44 | 130 | |||||||||||||||
| 4IK(RK)30A(GN) | 86 | 44 | 130 | ||||||||||||||||
| 4IK(RK)40A(GN) | 101 | 44 | 145 | ||||||||||||||||
| Gear Head-Torque Table (kg.cm) | |||||||||||||||||||
| ( kg.cm x 9.8 ÷ 100 ) = N.m | |||||||||||||||||||
| r/min | 500 | 300 | 200 | 150 | 120 | 100 | 75 | 60 | 50 | 30 | 20 | 15 | 10 | 7.5 | 6 | 5 | 3 | ||
| Gear Redcution Ratio | 50Hz | 3 | 5 | 7.5 | 10 | 12.5 | 15 | 20 | 25 | 30 | 50 | 75 | 100 | 150 | 200 | 250 | 300 | 500 | |
| 60Hz | 3.6 | 6 | 9 | 15 | 18 | 30 | 36 | 60 | 90 | 120 | 180 | 300 | 360 | 600 | |||||
| Permissible Load | 25W | kg.cm | 4 | 6.7 | 10 | 13.3 | 16 | 20 | 26.7 | 32 | 39 | 65 | 80 | 80 | 80 | 80 | 80 | 80 | 80 |
| 30W | kg.cm | 4.8 | 8 | 12 | 16 | 20 | 24 | 32 | 38 | 45 | 76 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | |
| 40W | kg.cm | 6.7 | 11 | 16 | 21.3 | 28 | 33 | 42 | 54 | 65 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | |
| Note: Speed figures are based on synchronous speed, the actual output speed, under rated torque conditions, is about 10~20% less than synchronous speed. Grey background indicates: output shaft of geared motor rotates in the same direction as output shaft of motor White background indicates: rotation in the opposite direction |
|||||||||||||||||||
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial |
|---|---|
| Speed: | Constant Speed |
| Number of Stator: | Single-Phase |
| Function: | Driving, Control |
| Casing Protection: | Protection Type |
| Number of Poles: | 4 |
| Customization: |
Available
|
|
|---|
What are the maintenance requirements for gear motors, and how can longevity be maximized?
Gear motors, like any mechanical system, require regular maintenance to ensure optimal performance and longevity. Proper maintenance practices help prevent failures, minimize downtime, and extend the lifespan of gear motors. Here are some maintenance requirements for gear motors and ways to maximize their longevity:
1. Lubrication:
Regular lubrication is essential for gear motors to reduce friction, wear, and heat generation. The gears, bearings, and other moving parts should be properly lubricated according to the manufacturer’s recommendations. Lubricants should be selected based on the motor’s specifications and operating conditions. Regular inspection and replenishment of lubricants, as well as periodic oil or grease changes, should be performed to maintain optimal lubrication levels and ensure long-lasting performance.
2. Inspection and Cleaning:
Regular inspection and cleaning of gear motors are crucial for identifying any signs of wear, damage, or contamination. Inspecting the gears, bearings, shafts, and connections can help detect any abnormalities or misalignments. Cleaning the motor’s exterior and ventilation channels to remove dust, debris, or moisture buildup is also important in preventing malfunctions and maintaining proper cooling. Any loose or damaged components should be repaired or replaced promptly.
3. Temperature and Environmental Considerations:
Monitoring and controlling the temperature and environmental conditions surrounding gear motors can significantly impact their longevity. Excessive heat can degrade lubricants, damage insulation, and lead to premature component failure. Ensuring proper ventilation, heat dissipation, and avoiding overloading the motor can help manage temperature effectively. Similarly, protecting gear motors from moisture, dust, chemicals, and other environmental contaminants is vital to prevent corrosion and damage.
4. Load Monitoring and Optimization:
Monitoring and optimizing the load placed on gear motors can contribute to their longevity. Operating gear motors within their specified load and speed ranges helps prevent excessive stress, overheating, and premature wear. Avoiding sudden and frequent acceleration or deceleration, as well as preventing overloading or continuous operation near the motor’s maximum capacity, can extend its lifespan.
5. Alignment and Vibration Analysis:
Proper alignment of gear motor components, such as gears, couplings, and shafts, is crucial for smooth and efficient operation. Misalignment can lead to increased friction, noise, and premature wear. Regularly checking and adjusting alignment, as well as performing vibration analysis, can help identify any misalignment or excessive vibration that may indicate underlying issues. Addressing alignment and vibration problems promptly can prevent further damage and maximize the motor’s longevity.
6. Preventive Maintenance and Regular Inspections:
Implementing a preventive maintenance program is essential for gear motors. This includes establishing a schedule for routine inspections, lubrication, and cleaning, as well as conducting periodic performance tests and measurements. Following the manufacturer’s guidelines and recommendations for maintenance tasks, such as belt tension checks, bearing replacements, or gear inspections, can help identify and address potential issues before they escalate into major failures.
By adhering to these maintenance requirements and best practices, the longevity of gear motors can be maximized. Regular maintenance, proper lubrication, load optimization, temperature control, and timely repairs or replacements of worn components contribute to the reliable operation and extended lifespan of gear motors.
How do gear motors compare to other types of motors in terms of power and efficiency?
Gear motors can be compared to other types of motors in terms of power output and efficiency. The choice of motor type depends on the specific application requirements, including the desired power level, efficiency, speed range, torque characteristics, and control capabilities. Here’s a detailed explanation of how gear motors compare to other types of motors in terms of power and efficiency:
1. Gear Motors:
Gear motors combine a motor with a gear mechanism to deliver increased torque output and improved control. The gear reduction enables gear motors to provide higher torque while reducing the output speed. This makes gear motors suitable for applications that require high torque, precise positioning, and controlled movements. However, the gear reduction process introduces mechanical losses, which can slightly reduce the overall efficiency of the system compared to direct-drive motors. The efficiency of gear motors can vary depending on factors such as gear quality, lubrication, and maintenance.
2. Direct-Drive Motors:
Direct-drive motors, also known as gearless or integrated motors, do not use a gear mechanism. They provide a direct connection between the motor and the load, eliminating the need for gear reduction. Direct-drive motors offer advantages such as high efficiency, low maintenance, and compact design. Since there are no gears involved, direct-drive motors experience fewer mechanical losses and can achieve higher overall efficiency compared to gear motors. However, direct-drive motors may have limitations in terms of torque output and speed range, and they may require more complex control systems to achieve precise positioning.
3. Stepper Motors:
Stepper motors are a type of gear motor that excels in precise positioning applications. They operate by converting electrical pulses into incremental steps of movement. Stepper motors offer excellent positional accuracy and control. They are capable of precise positioning and can hold a position without power. Stepper motors have relatively high torque at low speeds, making them suitable for applications that require precise control and positioning, such as robotics, 3D printers, and CNC machines. However, stepper motors may have lower overall efficiency compared to direct-drive motors due to the additional power required to overcome the detents between steps.
4. Servo Motors:
Servo motors are another type of gear motor known for their high torque, high speed, and excellent positional accuracy. Servo motors combine a motor, a feedback device (such as an encoder), and a closed-loop control system. They offer precise control over position, speed, and torque. Servo motors are widely used in applications that require accurate and responsive positioning, such as industrial automation, robotics, and camera pan-tilt systems. Servo motors can achieve high efficiency when properly optimized and controlled but may have slightly lower efficiency compared to direct-drive motors due to the additional complexity of the control system.
5. Efficiency Considerations:
When comparing power and efficiency among different motor types, it’s important to consider the specific requirements and operating conditions of the application. Factors such as load characteristics, speed range, duty cycle, and control requirements influence the overall efficiency of the motor system. While direct-drive motors generally offer higher efficiency due to the absence of mechanical losses from gears, gear motors can deliver higher torque output and enhanced control capabilities. The efficiency of gear motors can be optimized through proper gear selection, lubrication, and maintenance practices.
In summary, gear motors offer increased torque and improved control compared to direct-drive motors. However, gear reduction introduces mechanical losses that can slightly impact the overall efficiency of the system. Direct-drive motors, on the other hand, provide high efficiency and compact design but may have limitations in terms of torque and speed range. Stepper motors and servo motors, both types of gear motors, excel in precise positioning applications but may have slightly lower efficiency compared to direct-drive motors. The selection of the most suitable motor type depends on the specific requirements of the application, balancing power, efficiency, speed range, and control capabilities.
Can you explain the advantages of using gear motors in various mechanical systems?
Gear motors offer several advantages when utilized in various mechanical systems. Their unique characteristics make them well-suited for applications that require controlled power transmission, precise speed control, and torque amplification. Here’s a detailed explanation of the advantages of using gear motors:
1. Torque Amplification:
One of the key advantages of gear motors is their ability to amplify torque. By using different gear ratios, gear motors can increase or decrease the output torque from the motor. This torque amplification is crucial in applications that require high torque output, such as lifting heavy loads or operating machinery with high resistance. Gear motors allow for efficient power transmission, enabling the system to handle demanding tasks effectively.
2. Speed Control:
Gear motors provide precise speed control, allowing for accurate and controlled movement in mechanical systems. By selecting the appropriate gear ratio, the rotational speed of the output shaft can be adjusted to match the requirements of the application. This speed control capability ensures that the mechanical system operates at the desired speed, whether it needs to be fast or slow. Gear motors are commonly used in applications such as conveyors, robotics, and automated machinery, where precise speed control is essential.
3. Directional Control:
Another advantage of gear motors is their ability to control the rotational direction of the output shaft. By using different types of gears, such as spur gears, bevel gears, or worm gears, the direction of rotation can be easily changed. This directional control is beneficial in applications that require bidirectional movement, such as in actuators, robotic arms, and conveyors. Gear motors offer reliable and efficient directional control, contributing to the versatility and functionality of mechanical systems.
4. Efficiency and Power Transmission:
Gear motors are known for their high efficiency in power transmission. The gear system helps distribute the load across multiple gears, reducing the strain on individual components and minimizing power losses. This efficient power transmission ensures that the mechanical system operates with optimal energy utilization and minimizes wasted power. Gear motors are designed to provide reliable and consistent power transmission, resulting in improved overall system efficiency.
5. Compact and Space-Saving Design:
Gear motors are compact in size and offer a space-saving solution for mechanical systems. By integrating the motor and gear system into a single unit, gear motors eliminate the need for additional components and reduce the overall footprint of the system. This compact design is especially beneficial in applications with limited space constraints, allowing for more efficient use of available space while still delivering the necessary power and functionality.
6. Durability and Reliability:
Gear motors are designed to be robust and durable, capable of withstanding demanding operating conditions. The gear system helps distribute the load, reducing the stress on individual gears and increasing overall durability. Additionally, gear motors are often constructed with high-quality materials and undergo rigorous testing to ensure reliability and longevity. This makes gear motors well-suited for continuous operation in industrial and commercial applications, where reliability is crucial.
By leveraging the advantages of torque amplification, speed control, directional control, efficiency, compact design, durability, and reliability, gear motors provide a reliable and efficient solution for various mechanical systems. They are widely used in industries such as robotics, automation, manufacturing, automotive, and many others, where precise and controlled mechanical power transmission is essential.
editor by CX 2024-04-03